Panasonic KX-TG8162AL - Intercom;Locator; Intercom; Transferring calls, conference calls; Handset locator

Intercom
Intercom calls can be made between
handsets.
Note:
R When paging the handset, the paged
handset beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press M
N, then press
M
N.
Making an intercom call
1
(middle soft key) a
2 MbN: Select the desired unit. a
R To stop paging, press M N.
3 When you finish talking, press M N.
Answering an intercom call
1 Press M
N to answer the page.
2 When you finish talking, press M
N.
Using the smart function key
Press MSmart functionN to answer the page.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit: Press M
N.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit: Press M
N.
Handset: Press M
N.
Using the smart function key
You can also stop paging by pressing MSmart
functionN.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1 During an outside call, press
to put
the call on hold.
2 MbN: Select the desired unit. a
3 Wait for the paged party to answer.
R If the paged party does not answer,
press
to return to the outside call.
4 To complete the transfer:
Press M N.
R The outside call is being routed to the
destination unit.
To establish a conference call:
a MbN: “Conference” a
R To leave the conference, press
M
N. The other 2 parties can
continue the conversation.
R To put the outside call on hold:
a MbN: “Hold” a
To resume the conference: a
MbN: “Conference” a
Note:
R If you want to return to the outside call after
the paged party answers, press .
Answering a transferred call
Press M
N to answer the page.
Using the smart function key
Press MSmart functionN to answer the page.
44
Intercom/Locator
TG816xAL(e)_0131_ver001.pdf 44 2012/01/31 20:20:21