Panasonic KX-TG8321E - Page 40

SMS (Short Message Service)
40
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
4 {V}/{^}: “Private Mailbox” i
M
5 {V}/{^}: Select the desired new
mailbox number (“Mailbox1” to
“Mailbox6”). i M
6 Enter a name for the mailbox (5
characters max.; page 50). i M
7 Enter a 4-digit password for the
mailbox. i M 2 times i
{ih}
Note:
L To receive SMS messages using a
mailbox, inform others of your mailbox
number.
L If you forget the password assigned to
a mailbox, contact your nearest
Panasonic service centre.
Changing private mailbox
settings
You can change the password or name
of the private mailbox and erase the
mailbox.
1 K (centre of joystick) i X i
M
2 {V}/{^}: “Public” i M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: “Private Mailbox” i
M
5 {V}/{^}: Select the desired mailbox
name. i M 2 times
6 Enter the mailbox’s 4-digit
password.
7 Edit the mailbox name (5 characters
max.; page 50). i M
L To erase the mailbox, press and
hold {C/T}. i M i
{V}/{^}: “Yes” i M i
{ih}
8 Enter a 4-digit password for the
mailbox. i M 2 times i
{ih}
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4
digits max.) so that SMS messages are
sent properly. When sending SMS
messages to entries in the phonebook or
redial list, the PBX line access number is
deleted. The default setting is “Off”.
1 K (centre of joystick) i X i
M
2 {V}/{^}: “Public” i M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: “PBX Access No.” i
M
5 {V}/{^}: “On” i M
6 Enter your PBX line access code
and a dialling pause, if necessary.
i M 2 times i {ih}
TG8321E(e-e).book Page 40 Monday, March 3, 2008 2:33 PM