– 8 –
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, re-register the handset.
1 1 (centre of joystick) i N i M
2 {V}/{^}: “Register” i M 2times
3 {V}/{^}: Select a base unit number. i M
Press and hold {x} for about 5 seconds, until
the registration tone sounds.
LThe next step must be completed within 90
seconds.
Wait until “Base PIN” is displayed. i Enter
the base unit PIN (default: “0000”). i M
LWhen the handset has been registered
successfully, w stops flashing.
Handset
M
Base unit
{x}
Handset
M
TG8421E(e)_QG.fm Page 8 Wednesday, December 24, 2008 2:14 PM
To Next Page
Loading...
