Panasonic KX-TG9381 - Programming Settings; Accessing and Navigating Settings

Programming
26
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset or base unit.
To access the features, there are 2 methods:
– scrolling through the display menus (page 26)
– using the direct commands (page 29)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Proceed with the operation for your unit.
Handset: Press {V}, {^}, {<}, or {>} to select the desired main menu. i {SELECT}
Base unit: Press {V}, {^}, {7}, or {8} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF} on the handset or {■} (EXIT) on the base unit.
Note:
L See page 29 for the default settings.
Handset
Y Handset / [ Base unit
Main menu Sub-menu 1 Sub-menu 2 Page
View Caller ID ––34
Phonebook ––22
Answering device Play new msg. –39
Play all msg. –39
Erase all –39
Settings Ring count
*1
42
Recording time
*1
42
Remote code
*1
40
Call screening 42
TG938x(e).book Page 26 Friday, July 3, 2009 10:10 AM