Ringer volume is off.
*1
(page 17)
Speakerphone is on. (page 16)
Night mode is on. (page 31)
Alarm is on. (page 31)
Handset number
PRIV. Privacy mode is on. (page 19)
*1 Corresponding line number(s) is indicated next
to the item.
Main menu icons
The following icons are shown when you press
down on the middle soft key in standby mode.
Icon Feature
View Caller ID
Phonebook
*1
Set answering
*2
Answering device
Ringer settings
Initial settings
Customer support
*1 Base unit
*2 Handset
LINE 1 indicator/LINE 2 indicator on
the base unit
The LINE 1 indicator and LINE 2 indicator show
the status of each line, respectively, as follows.
Status Meaning
Light off The line is available.
Light on The line is in use.
Flashing
rapidly
A call is being received.
Flashing A call is put on hold or the
answering system is answering a
call.
USB indicator on the base unit
Status Meaning
Light off “Telephone Plug-in” is not active.
Light on “Telephone Plug-in” is active.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing MMENUN, # and then the
corresponding code on the dial keypad
(page 27).
Example: Press MMENUN#110.
n Symbol meaning:
Symbol Meaning
Perform with the base unit.
Perform with the handset.
Example:
MbN: “Off”
Press MCN or MDN to select the
words in quotations.
Date and time
Program this setting using either the base unit or
one of the handsets.
Base unit / Handset
1 MMENUN#101
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 15, 2011
07 15 11
3 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
4 *: Select “AM” or “PM”. a MSAVEN
5 Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
French is selected, 24-hour clock format is used.
14
Getting Started
To Next Page
Loading...
