5
Registering a handset to a base unit
1
Base unit:
NKX-TG4111 series
Press and hold {LOCATOR} for about 5 seconds. (No registration
tone)
NKX-TG4131/KX-TG6591/KX-TG6641/KX-TG6651 series
Press and hold {LOCATOR} for about 5 seconds until the
registration tone sounds.
LIf all registered handsets start ringing, press {LOCATOR} again to
stop, then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long
beep sounds and w is displayed.
Note:
LIf an error tone sounds, or if _ is displayed, register the handset
according to the base unit’s operating instructions.
Display language
1
{MENU} (11)
2 {r}: Select the desired setting. s {SAVE}
3 {OFF}
Belt clip
NTo attach NTo remove
B
A
TGA659C(e).fm Page 5 Tuesday, December 28, 2010 1:54 PM
To Next Page
Loading...
