To activate this feature, you must edit an
en
try in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
This feature can be set for each unit
(page 44). The default setting is “On”.
Note:
R Phone numbers from the 4 most
recently edited area codes are
automatically edited.
R If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
area codes you want to edit once
again.
Erasing selected caller
in
formation
Handset / Base unit
*1
*
1 KX-TG7641 series:page 4
1 Proceed with the operation for your
unit.
Handset: MFN CID
Base unit: M
N CID
2 M N/M N: Select the desired entry.
3 ME
RASEN
M N/M N: “Y
es”
4 Proceed with the operation for your
unit.
Handset: MSELECTNAMOFFN
Base unit: M
NAMnN
(EXIT)
Erasing all caller information
Handset
1 M N CID
2 ME
RASEN
M N/M N: “Y
es” A
MSELECTN
MOFFN
Storing caller information to
th
e phonebook
Handset
1 M N CID
2 M N/M N: Select the desired entry.
R T
o edit the number, press
MSELECTN, then press MEDITN
repeatedly until the phone
number is shown in the desired
format.
3 MSAVEN
4 M
N/M N: “P
honebook”
MSELECTN
5 Continue from step 3, “Editing
entries”, page 37.
Base unit
Available for:
KX
-TG7641 series (page 4)
1 M N CID
2 MCN/MDN:
Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone
number is shown in the desired
format (page 55).
3 M
N A MCN/MDN: “Y
es” A M
N
4 MnN (
EXIT)
Note:
R If you stored caller information to the
phonebook using the base unit, the
entry is automatically assigned to
group 1.
56
For assistance, please visit http://www.panasonic.com/help
Caller ID Service
To Next Page
Loading...
