n
From the caller list:
1 M
N
2 MbN:
Select the entry to be blocked. a
MMENUN
3 MbN: “Save Call Block” a MOKN
4 MbN: “Yes” a MOKN a M
N
n
By entering phone numbers:
1 MMENUN#217
2 MbN: “Single Number” a MOKN
3 MMENUN a MbN: “Add” a MOKN
4 Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
5 MOKN a M
N
Storing a range of numbers
1 MM
ENUN#217
2 MbN: “Range of Numbers” a MOKN
3 MMENUN a MbN: “Add” a MOKN
4 Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
5 MOKN a M
N
Blocking incoming calls that
h
ave no phone number
You can block calls when no phone number is
provided, such as private callers.
1 MMENUN#240
2 MbN: Select the desired setting. a MOKN
3 M
N
Viewing/editing/erasing call
b
lock numbers
1 MMENUN#217
2 MbN: “Single Number” or “Range of
Numbers” a MOKN
3 MbN: Select the desired entry.
R To exit, press M
N.
4 T
o edit a number:
MEDITN a Edit the number. a MOKN a
M
N
T
o erase a number:
MERASEN a MbN: “Yes” a MOKN a
M
N
N
ote:
R When editing, press the desired dial key to
add digits and press MCLEARN to erase
digits.
Erasing all call block numbers
1 MM
ENUN#217
2 MbN: “Single Number” or “Range of
Numbers” a MOKN
3 MMENUN a MbN: “Erase All” a MOKN
4 MbN: “Yes” a MOKN
5 MbN: “Yes” a MOKN a M
N
Other programming
Changing the handset name
T
he default handset name is “Handset 1” to
“Handset 4”. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 28).
1 MMENUN#104
2 Enter the desired name (10 characters
max.). a MOKN a M
N
Displaying the handset name
Y
ou can select whether or not the handset
name is displayed in standby mode. The
default setting is “Off”.
1 MMENUN#105
2 MbN: Select the desired setting. a MOKN
a M
N
28
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Programming
To Next Page
Loading...
