Panasonic KX-TGH262B - Handset Disassembly and Component Removal; Handset Cabinet Disassembly Steps; Handset PC Board and Component Removal

49
KX-TGH260/KX-TGH262/KX-TGH263/KX-TGH264/KX-TGHA20/KX-TGA20
11.1.2. Handset
Remove the 4 screws.
Insert a plastic card.
(Ex. Used SIM card etc.)
between the cabinet body
and the cabinet cover, then
pull it along the gap to open
the cabinet.
Likewise, open the other
side of the cabinet.
Remove the cabinet cover
by pushing it upward.
Remove the solders.
Remove the solders to remove
the 2 charge terminals.
Remove the screw to remove
the main P. C. board.
Cabinet body
Cabinet cover
Cabinet cover
4 screws
Solders
Screw
Main P.C. board
2 charge terminals