Basic Operations
13
Making calls using the
handset
1 Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2 Press {CALL} or {C}.
L The unit selects the default line
configured by your administrator.
L You can also select the line
manually as follows:
{LINE} i {V}/{^}: Select the
desired line. i {CALL}
3 When you finish talking, press
{OFF} or place the handset on the
charger.
Note:
L For further details, please read the
User Guide on the Panasonic Web
site. See page 3 for Panasonic URL.
Using the speakerphone
1
Dial the phone number and press
{s}.
L The unit selects the default line
configured by your administrator.
L You can also select the line
manually as follows:
{LINE} i {V}/{^}: Select the
desired line. i {s}
L Speak alternately with the other
party.
2 When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or
speaker volume
Push the joystick up or down repeatedly
while talking.
Making a call using the redial
list
The last 10 phone numbers dialled are
stored in the redial list (each 32 digits
max.).
1 {REDIAL}
2 {V}/{^}: Select the desired phone
number.
3 {C}/{s}
L If {s} is pressed and the other
party’s line is engaged, the unit
automatically redials multiple
times. While the handset is
waiting to redial, the ringer
indicator flashes. To cancel, press
{OFF}.
Making calls using the
base unit (KX-TGP550
only)
1 Dial the phone number.
L To correct a digit, press {CLEAR}.
2 Lift the corded handset.
L The unit selects the default line
configured by your administrator.
L You can also select the line
manually as follows:
{LINE} i {V}/{^}: Select the
desired line. i Lift the corded
handset.
3 When you finish talking, place the
corded handset on the cradle.
To Next Page
Loading...
