Setting Up
19
Setting up the handset
Connecting the charger
L Use only the supplied Panasonic AC
adaptor PQLV219E.
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 6 hours.
L When the batteries are fully charged,
the charge indicator goes off.
Note when setting up
Note for connections
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a power
failure.
Note for battery installation
L Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted in the
User Guide on the Panasonic Web
site. See page 3 for Panasonic URL.
L Wipe the battery ends (S, T) with a
dry cloth.
L Avoid touching the battery ends (S,
T) or the unit contacts.
(220-240 V AC,
50/60 Hz)
Hooks
Rechargeable Ni-MH ONLY
Confirm
“Charging”
is displayed.
Charge indicato
To Next Page
Loading...
