For assistance, please call: 1-800-211-PANA(7262)
Advanced Operation
21
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out.
To set the call restriction
Make sure that a call is not put on hold.
1
Press (PROGRAM).
≥The MUTE indicator flashes.
2
Press (MUTE).
3
Press (1).
≥If you use “1111” as a PIN code
(factory set), there is no need to
enter a PIN code. Go to step 6.
4
Enter the PIN code (p. 19).
5
Press (PROGRAM).
≥If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN
code and press (PROGRAM).
6
Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)).
≥If you enter a wrong number, enter a correct number.
≥To change restricted digits from 2 digits to 1 digit, press ($) and enter 1 digit.
7
Press (PROGRAM).
≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.
≥If your unit is connected to a PBX, this function may not operate. Contact your
PBX supplier for more information.
To cancel the call restriction
Follow steps 1 through 5. In step 6, press ($) to cancel call restriction and
press (PROGRAM).
≥A long beep will sound and the unit will return to the standby mode.
To Next Page
Loading...
