“
Special Features
30
FLASH Button
Pressing (FLASH) allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You
can select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400,
600, 700 ms (milliseconds)”. Your phone comes from the factory set to
“600 ms”.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (2).
≥The current setting is displayed.
4
Press a dialing button ((1) to (0)).
(1) : 80 ms (2) : 90 ms (3) : 100 ms (4) : 110 ms
(5) : 200 ms (6) : 250 ms (7) : 300 ms (8) : 400 ms
(9) : 600 ms (0) : 700 ms
5
Press (PROGRAM).
≥A long beep sounds.
≥The unit will return to the standby mode.
≥If the unit is connected via a PBX, you may not use PBX functions (transferring a
call, etc.) properly. Consult your PBX supplier for the correct setting.
To Next Page
Loading...
