Panasonic KX-TS840MX - Speed Dialer; Storing Speed Dial Numbers; Erasing and Dialing Speed Dial

Speed dialer
You can store up to 10 numbers in the
memory stations. The dialing buttons
M0N to M9N function as memory station
numbers. Do not press any memory
stations before storing to prevent
misoperation.
Note:
R If a phone number is stored in a
dialing button which already contains
a phone number, the old number will
be erased.
Storing phone numbers
1 Lift the handset.
2 MPROGRAMN
R Status indicator light will start
double flashing at an interval.
3 Enter a phone number up to 32
digits.
R If a pause is required for dialing,
press MPAUSEN. A pause stored
in a phone number counts as one
digit.
R If a wrong number is entered,
press M
DIAL LOCK/EXITN and
repeat step 2.
4 MAUTO/LOWERN ® Press a
memory station number (M0N to M9N).
R A long beep sounds.
R Status indicator light will turn OFF.
5 When finished, hang up.
Note:
R We recommend you make a note of
which phone numbers are stored in
which dial keys.
Erasing a stored number
1 Lift the handset.
2 MPROGRAMN
R Status indicator light will start
double flashing at an interval.
3 MAUTO/LOWERN ® Press a
memory station number (M0N to M9N)
for the phone number to be erased.
R A long beep sounds.
R Status indicator light will turn OFF.
4 When finished, hang up.
Dialing a stored number
1 Lift the handset or press
MSP-PHONEN.
R Status indicator light will turn ON
after pressing MSP-PHONEN.
2 MAUTO/LOWERN ® Press the
memory station number (M0N to M9N).
3 When you finish talking, place the
handset on the cradle or press
MSP-PHONEN.
R Status indicator light will turn OFF
after pressing MSP-PHONEN.
14
Speed Dialer