Subscriber’s Manual
140
A3.12 Button Assignment via PC Programming
KX-TD500 and KX-TA824 users can assign buttons via PC programming. Follow the
procedure below to assign each button.
KX-TD500
1. Go to "4-2 Extension Line" screen (refer to the screen image in A3.6 Live Call
Screening Assignment via PC Programming).
2. Select the "Card No." and "Port No." which you are going to program.
3. Click "CO Key" in the upper right corner. "Flexible CO Key" screen (for all CO
Keys) displays.
4. Click the Key Number to which a button will be assigned.
"Flexible CO Key" screen displays.
To Next Page
Loading...
