6.3 Programming Your
Extension for Voice Mail
Transfer
Voice Mail Transfer (VTR) Button
Assignment
Follow the procedure below to assign a VTR
button on your extension.
1. Enter Personal Programming:
While on-hook, press the PROGRAM
button.
(Display changes to PT-PGM Mode.)
2. Press the Flexible (CO or DSS/BLF)
button that you want to assign as the
VTR button.
3. Press [94].
Screen output: VTR-
4. Enter a Voice Mail extension number.
Screen output: VTR- _ _ _
(_ _ _ = The Voice Mail extension
number you entered).
5. Press the STORE button.
6. Press the PROGRAM button or lift the
handset to exit the Personal
Programming mode.
Document Version 3.0 2010/06 Subscriber’s Manual 57
6.3 Programming Your Extension for Voice Mail Transfer
To Next Page
Loading...
