7.3 Programming Your
Extension for Voice Mail
Transfer
Voice Mail Transfer (VTR) Button
Assignment
Follow the procedure below to assign a VTR
button on your extension.
1. Enter PITS Programming:
a. While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TA624 and KX-TA824.) The
display changes to PT-PGM Mode.
2. Press the Flexible (CO or DSS/BLF)
button that you wish to assign as the
VTR button.
3. Enter the programming number.
KX-TD: [8]
KX-TA1232: [8]
KX-TA: [94]
Screen output: VTR
4. Dial the Voice Mail extension number.
Screen output: VTR- _ _ _
(_ _ _ = The extension number you
entered).
5. Press the STORE button.
6. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
Document Version 3.0 2010/06 Subscriber’s Manual 61
7.3 Programming Your Extension for Voice Mail Transfer
To Next Page
Loading...
