Panasonic KX-TVA50 - Introduction to System Administration

• Message Cancel for Live Call Screening
*1
:
Enable/Disable
• Intercom Paging Group: 1-32/All
*1
• Number of Caller IDs for Caller Name
Announcement: 1-30/0: None
*1
• Number of New Messages Announcement:
Subscriber Service, Receiving Message, or None
• Total Number of Message Announcement:
Subscriber Service, Receiving Message, or None.
• Mailbox Capacity Warning: 1-60 min/0: None
• VM Menu
*1
: Enable/Disable
• Personal Greeting for Caller ID
*1
: Enable/Disable
• Caller ID Screen
*1
: Enable/Disable
• Call Transfer to Outside
*1
: Enable/Disable
• Subscriber Tutorial
*1
: Enable/Disable
• Notify of Transfer: Enable/Disable
• Directory Listing
*1
: Enable/Disable
• Auto Receipt: Enable/Disable
• Autoplay New Message: Enable/Disable
• First Playback Urgent Messages: Enable/Disable
• Announce Message Transferred Information:
Enable/Disable
• Caller ID Number Announcement: Enable/
Disable
• Announce Option Menu After Erasing
Messages: Enable/Disable
• New Message Length Announcement: Enable/
Disable
*1
Not available for COS No. 63 (Message Manager) and COS No.
64 (System Manager)
*2
Not available for COS No. 64 (System Manager)
Note
• If the VPS is being programmed via KX-TVA
Maintenance Console, the System Manager
cannot set COS parameters. The VPS will
announce, "Sorry, this function is not
available".
1. Log in to the System Manager’s mailbox.
• See 2.1 Logging in to the System Manager’s
Mailbox.
2.
4
2
3. Enter the Class of Service Number (1-64).
4. Follow the steps below and set each parameter.
Personal Greeting Length
1.
1
to change the greeting length.
2
to accept the current setting, then go to the
next parameter.
2. Enter the greeting length (1-360 s).
3.
2
to accept.
New Message Retention Time
1.
1
to change the retention time.
2
to accept the current setting, then go to the
next parameter.
2. Enter the retention time (a maximum of 30 days or
0: Unlimited).
3.
2
to accept.
Saved Message Retention Time
1.
1
to change the retention time.
2
to accept the current setting, then go to the
next parameter.
2. Enter the retention time (a maximum of 30 days or
0: Unlimited).
3.
2
to accept.
Message Length
1.
1
to change the message length.
2
to accept the current setting, then go to the
next parameter.
2. Enter the message length (1-60 min or 0:
Unlimited).
3.
2
to accept.
Total Message Time Available per
Mailbox
1.
1
to change the total message time.
2
to accept the current setting, then go to the
next parameter.
2. Enter the total message time ([KX-TVA200] 1-600
min or 0: Unlimited, [KX-TVA50] 1-120 min or 0:
Unlimited).
3.
2
to accept.
Message Retrieval Order
1.
1
to change the current setting (LIFO or FIFO).
8 Manager’s Manual Document Version 2.1 2010/01
2.3 Setting Class of Service (COS) Parameters