Panasonic KX-TVA50 - KX-TVA Maintenance Console Installation

2
to accept the current setting, then go to the
next parameter.
2.
2
to accept.
Prompt Mode
1.
1
for Primary.
2
for System.
• If set to Primary, go to step 2.
2. Press [1] to [10] (KX-TVA200) or press [1] to [3]
(KX-TVA50) to change the desired mode.
KX-TVA200
1
for System 1 Prompt.
2
for System 2 Prompt.
3
for System 3 Prompt.
4
for System 4 Prompt.
5
for System 5 Prompt.
6
for System 6 Prompt.
7
for System 7 Prompt.
8
for System 8 Prompt.
9
for System 9 Prompt.
10
for System 10 Prompt.
KX-TVA50
1
for System 1 Prompt.
2
for System 2 Prompt.
3
for System 3 Prompt.
3.
3
to accept.
Delete Message Confirmation
1.
1
to change the current setting (enable or
disable).
2.
2
to accept.
Message Envelope Playback Mode
1.
1
for Before.
2
for After.
3
for Require.
4
to accept the current setting, then go to the
next parameter.
2.
4
to accept.
Caller ID Callback
1.
1
to change the current setting (enable or
disable).
2.
2
to accept.
Remote Call Forward to Outside
1.
1
to change the current setting (enable or
disable).
2.
2
to accept.
Play System Prompt after Personal
Greeting
1.
1
to change the current setting (enable or
disable).
2.
2
to accept.
Use Call Waiting on Busy
1.
1
to change the current setting (enable or
disable).
2.
2
to accept.
Message Cancel for Live Call
Screening
1.
1
to change the current setting (enable or
disable).
2.
2
to accept.
Intercom Paging Group
1.
1
to change the paging group.
2
to accept the current setting, then go to the
next parameter.
2. Enter the group number (1-33).
3.
3
to accept.
• If set to "33 (Group 33)", the Intercom Paging
feature is activated for all groups.
Document Version 2.1 2010/01 Manager’s Manual 9
2.3 Setting Class of Service (COS) Parameters