Panasonic KX-TVA50 - System Guidance; Selection Menu Repeat Cycle; Delay Time after Connected Received for Incoming

Selection Menu Repeat Cycle
Specifies the number of times the VPS will play the Multilingual Selection Menu.
Default
1
Value Range
1–3 times
Feature Manual References
2.2.34 Multilingual Service
Delay Time After Connected Received for Incoming
Specifies the length of time (in seconds) that the VPS waits after the line is connected for incoming calls before
playing the prompt.
Default
0 s
Value Range
0 s–10 s
Feature Manual References
2.2.45 System Prompts
Delay Time After Connected Received for Outgoing
Specifies the length of time (in seconds) that the VPS waits after the line is connected for outgoing calls before
playing the prompt.
Default
1 s
Value Range
0 s–10 s
Feature Manual References
2.2.45 System Prompts
2.5.4.4 System Guidance
Specifies the parameters which vary depending on the language assigned as the System Guidance language.
Follow the steps below to edit System Guidance.
1. Click Click to edit....
2. Select the desired Guidance No.
3. Edit each parameter.
4. Click OK.
Document Version 3.0 2010/06 Programming Manual 149
2.5.4 Parameters