Note
• To access the VPS remotely using this feature, a KX-TVA296 Modem Card must be installed. For more
details, see "2.7.5 Modem Card (KX-TVA296)" in the Installation Manual.
The following settings must be entered to match the settings of the modem and/or PC.
Setting Values Description
Phone No. – Enter the telephone number to dial into the VPS.
Port No. – Enter the port number used to connect to the VPS.
Password – Enter the password used to connect to the VPS.
To connect using a modem
1. From the Connect menu, select Dial-up (Modem).
2. Enter the administrator password and the settings as required.
3. Click Next, and Finish when the connection is completed.
1.5.5 Connect—Disconnect
Closes the connection between KX-TVA Maintenance Console and the VPS.
To disconnect
1. From the Connect menu, select Disconnect.
2. Click Yes.
18 Programming Manual Document Version 3.0 2010/06
1.5.5 Connect—Disconnect
To Next Page
Loading...
