Note
• If authentication is required when accessing the outgoing mail server (SMTP server), make the
appropriate settings under Advanced Settings.
• When sending message notifications by e-mail, the sent date is stamped to each message either by
the SMTP server used by the VPS, or by the receiver’s e-mail software.
E-mail Integration
If set to "Enable", subscribers are able to utilize E-mail Integration features.
Default
Disable
Value Range
Disable, Enable
Feature Manual References
2.2.20 E-mail Integration
Mail Address
Specifies the mail address of VPS. We recommend entering an administrator’s e-mail address here. If there
are any errors when the VPS tries to send e-mail messages, error messages will be sent to this address.
Default
None
Value Range
Max. 128 characters
Feature Manual References
2.2.20 E-mail Integration
Full Name
Specifies the full name that will appear in e-mail messages sent from the VPS.
Default
None
Value Range
Max. 64 characters
Feature Manual References
2.2.20 E-mail Integration
SMTP Server Address (Name)
Specifies the IP address or server name of the outgoing e-mail server used by the VPS.
Document Version 3.0 2010/06 Programming Manual 185
2.5.4 Parameters
To Next Page
Loading...
