Value Range
<Key Assignment>
Key: 3–9, 0
Assigned Operation:
Transfer to specified mailbox: Allow the caller to leave messages in a specified mailbox.
Transfer to specified extension: Transfers the caller to a specified extension.
Transfer to Voice Mail Service: Allows the caller to access Voice Mail Service.
Transfer to Automated Attendant Service: Allows the caller to access Automated Attendant Service.
Transfer to specified Custom Service Menu: Transfers the caller to the Custom Service specified here.
Transfer to operator: Connects the caller to an operator.
Transfer to outside (specified number): Transfers the caller to a specified outside telephone number. Enter
the PBX trunk (CO line) access number, such as 9.
Page the party: Pages the subscriber.
Repeat greeting: Repeats the greeting.
None: No operation assigned
<Outside Numbers>
Outside Number #1–#4: Max. 32 digits consisting of 0–9,
, #, and special codes
T: Dial Tone Detection
, : Dial Pause (default 1 s)
; : Dial Pause (default 3 s)
0–9, , #: Dial Code
No DTMF Input Operation: Recording, Disconnect (All Day), Disconnect (Only After Hours)
Feature Manual References
2.3.20 Personal Custom Service
Subscriber’s Manual References
5.18 Personal Custom Service
70 Programming Manual Document Version 3.0 2010/06
2.1.8 Personal Custom Service
To Next Page
Loading...
