Default
None
Value Range
1–64
Feature Manual References
2.3.2 Automatic Login (APT/DPT Integration Only)
Toll Saver
Allows subscribers to call the VPS and know whether or not new messages have been recorded in their
mailboxes by the number of rings they hear before the VPS answers their calls. Toll Saver is available under
the same conditions as Automatic Login; subscribers can use Toll Saver when calling from an outside
telephone whose number is stored as a Caller ID number, or by dialing a telephone number assigned to a
specified DID number or trunk (CO line).
Default
Disable
Value Range
Disable: Disables the Toll Saver feature.
DID: Toll Saver functions when the VPS receives the preprogrammed DID number from the PBX.
Caller ID: Toll Saver functions when Caller ID information is received that matches one of the preprogrammed
numbers (Caller ID 1 or 2)
Trunk: Toll Saver functions when the VPS receives a call on the preprogrammed trunk (CO line).
Feature Manual References
2.3.2 Automatic Login (APT/DPT Integration Only)
Document Version 3.0 2010/06 Programming Manual 75
2.1.10 Automatic Login
To Next Page
Loading...
