Panasonic KX-TVA50 - Use Call Waiting on Busy; Message Cancel for Live Call Screening

Use Call Waiting on Busy
If set to "Yes", the VPS signals the subscriber when he or she is on a call and another call is received.
Note
• The Call Waiting Sequence can be edited by clicking Edit System Parameters/Parameters/Call
Waiting Sequence at the bottom of the dialog box.
Default
No
Value Range
No, Yes
Message Cancel for Live Call Screening
If set to "Yes", the caller’s message will be deleted when the subscriber answers a call via Live Call Screening
while the caller is leaving a message.
Note
• The Live Call Screening feature is only available when the VPS is connected to a Panasonic KX-T
series PBX using APT/DPT Integration.
Default
Yes
Value Range
No, Yes
Feature Manual References
2.3.15 Live Call Screening (APT/DPT Integration Only)
Subscriber’s Manual References
5.12 Live Call Screening (LCS)
Remote Call Forward to CO
If set to "Yes", the subscriber can use the Remote Call Forwarding feature. This feature allows the subscriber
to program his or her extension remotely to forward calls to an outside telephone number. This telephone
number can be "Telephone Number 1" or "Telephone Number 2" (see 2.1.9 Remote Call FWD To CO), or any
other telephone number.
Note
• This feature is only available when the VPS is connected to a Panasonic KX-T series PBX using DPT
Integration.
• This feature may be prohibited by the PBX; PBX programming may also be necessary to enable calls
to forwarded to an outside telephone number for the COS of the extensions who will use this feature.
Default
No
86 Programming Manual Document Version 3.0 2010/06
2.2.2 Personal Options