5.3 KX-TDA Series PBX Programming for Inband Integration
168 Installation Manual
d) Program the PBX so that it will direct intercepted calls to the VPS.
1) Go to the "Groups-VM (DTMF) Group-System Setting" screen.
2) Select "None", "Answer by Mailbox", or "AA" as the parameter for "Intercept Routing
to the VPS Sequence".
This parameter determines which DTMF command the PBX will send to the VPS in
order to select the desired service (AA, VM, Custom Service, etc.). If using a Custom
Service, select "None".
3) Click "Apply" to save the changed data.
To Next Page
Loading...
