INTDIGIT_TIM
Value Format Integer
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
Value Range 1–15
Default Value 5
Web User Interface Reference Inter-digit Timeout (Page 110)
MACRODIGIT_TIM
Value Format Integer
Description Specifies the length of time, in seconds, that the unit waits for before
dialing the telephone number as modified according to the dial plan.
Value Range 1–15
Default Value 5
Web User Interface Reference Timer for Dial Plan (Page 110)
INTERNATIONAL_ACCESS_CODE
Value Format String
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Note
• No other characters are allowed.
Default Value Empty string ("+" is deleted)
Web User Interface Reference International Call Prefix (Page 110)
COUNTRY_CALLING_CODE
Value Format String
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9)
Default Value Empty string
Web User Interface Reference Country Calling Code (Page 111)
180 Administrator Guide Document Version 2011-06
5.5.1 Call Control Settings
To Next Page
Loading...
