Panasonic KX-UT133-B - National_Access_Code; Default_Line_Select; Data_Line_Mode; Num_Plan_Pickup_Direct

NATIONAL_ACCESS_CODE
Value Format String
Description When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Empty string
Web User Interface Reference National Access Code (Page 111)
DEFAULT_LINE_SELECT
Value Format Integer
Description Specifies the line used to make an outgoing call when no line is
specified in the dialing operation.
Note
• The available line number varies depending on the type of the
unit being used.
Value Range 1–2 (for KX-UT113/KX-UT123)
1–4 (for KX-UT133/KX-UT136)
Default Value 1
Web User Interface Reference Default Line for Outgoing (Page 111)
DATA_LINE_MODE
Value Format Boolean
Description Specifies whether to enable sending and receiving using data line
mode.
Value Range
• Y (Enable Data Line Mode)
• N (Disable Data Line Mode)
Default Value
N
NUM_PLAN_PICKUP_DIRECT
Value Format String
Description Specifies the feature number assigned to a BLF for performing call
pickup.
Value Range Max. 4 characters (consisting of 0–9, *, and #)
Default Value Empty string
Document Version 2011-06 Administrator Guide 181
5.5.1 Call Control Settings