Panasonic KX-UT133-B - Sip_Detect_Ssaf_N; Sip_Contact_On_Ack_N; Sip_Timer_B_N

SIP_DETECT_SSAF_n
Parameter Name Example SIP_DETECT_SSAF_1, SIP_DETECT_SSAF_2, …,
SIP_DETECT_SSAF_4
Value Format Boolean
Description Specifies whether to enable SSAF for the SIP servers (registrar server,
proxy server, and presence server).
Value Range
• Y (Enable SSAF)
• N (Disable SSAF)
Note
• If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_n" in
5.7.2 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
Default Value
N
Web User Interface Reference Enable SSAF (SIP Source Address Filter) (Page 101)
SIP_CONTACT_ON_ACK_n
Parameter Name Example SIP_CONTACT_ON_ACK_1, SIP_CONTACT_ON_ACK_2, …,
SIP_CONTACT_ON_ACK_4
Value Format Boolean
Description Specifies whether to add the "Contact" header to SIP ACK message.
Value Range
• Y (Add the "Contact" header)
• N (Do not add the "Contact" header)
Default Value
N
SIP_TIMER_B_n
Parameter Name Example SIP_TIMER_B_1, SIP_TIMER_B_2, …, SIP_TIMER_B_4
Value Format Integer
Description Specifies the value of SIP timer B (INVITE transaction timeout timer),
in milliseconds. For details, refer to RFC 3261.
Value Range 250–64000
Default Value 32000
Web User Interface Reference Timer B (Page 98)
230 Administrator Guide Document Version 2011-06
5.7.2 SIP Settings