Panasonic KX-UT133-B - Enable Global IP Address Usage Per Line; Line 1-Line 4; External RTP Port; Channel 1-25

Value Range IP address in dotted-decimal notation ("n.n.n.n" [n=0–255]) (Max.
15 digits)
Default Value Not stored.
4.3.5.2 Enable Global IP Address Usage per Line
Line 1–Line 4
Description Selects whether to enable the NAT Traversal feature for each line.
Note
• The number of lines available varies depending on the phone
being used, as follows:
– KX-UT113/KX-UT123: 1–2
– KX-UT133/KX-UT136: 1–4
Value Range
• Yes
• No
Default Value No
4.3.5.3 External RTP Port
Channel 1–25
Description Specifies the external RTP port number used for voice communication
for each channel.
Note
• The number of channels available varies depending on the
phone being used, as follows:
– KX-UT113/KX-UT123: 1–3
– KX-UT133/KX-UT136: 1–25
Value Range 0, 1024–49150 (0: Disable, even number only)
Note
• Each channel must be set to a unique port number, and all port
numbers must be an even number.
• You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 4.5.2.5 SIP Source Port. In addition, you cannot
specify a port number that is 1 less than a port number specified
in [Source Port] if the source port number is an odd number.
• All channels must be set to either enable or disable at the same
time.
Default Value 0
Document Version 2011-06 Administrator Guide 81
4.3.5 Static NAPT Settings