Default Value Not stored.
Configuration File Reference ADMIN_PASS (Page 149)
4.4.3 Change User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
• For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
• After you change the user password, the next time you access the Web user interface, the
authentication dialog box appears. 2 consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
4.4.3.1 Change User Password
Current Password
Description Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference USER_PASS (Page 149)
New Password
Description Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
84 Administrator Guide Document Version 2011-06
4.4.3 Change User Password
To Next Page
Loading...
