Available documentation
Available documentation
The following documents are included on the CD-ROM Laser Marker Smart Utility.
You need Adobe Reader (Version X or later) of Adobe Inc. to read the PDF version of the
manuals.
“Laser Safety Guide”
• Intended audience: All users
• This manual describes the safety measures required before you start to operate the laser
marking system.
“Setup and Maintenance Guide”
• Intended audience: System integrators and persons responsible for installing the laser
marking system.
• This manual describes the items which are necessary for the installation and
maintenance of the laser marking system.
‒ Specifications and dimensions
‒ Installation and connection methods
‒ Input and output specifications, descriptions of input and output signals, including
timing charts
‒ Maintenance information
‒ Troubleshooting
“Laser Marker NAVI smart Operation Manual”
• Intended audience: Operators of the laser marking system.
• This document describes how to operate the laser marking system using the
configuration software Laser Marker NAVI smart.
“Serial Communication Command Guide”
• Intended audience: Machine builders and system integrators
• This manual describes the communication commands for the external control of the
laser marking system via RS232C, Ethernet, or optional network unit (EtherNet/IP or
PROFINET).
“Serial Communication Command Guide: LP-400/V compatible mode”
• Intended audience: Machine builders and system integrators
• This manual describes compatible communication commands for the external control of
the LP-400/LP-V series.
ME-NAVIS2-OP-1 9
To Next Page
Loading...
Need help?
General
