30
Recording
DVQX1151 (ENG)
Selecting pictures from 4K burst file and saving
1
Select a picture with the [ ] on the
playback screen, and press
• In the case of recording with [ ] ([4K Pre-
Burst]), proceed to the step
3
.
2
Drag the slide bar to perform rough scene
selection
3
Drag to select the frame you want to save
as a picture
• Touch [ ]/[ ] to display the previous or next set
of frames (45) in slide view.
4
Touch [ ] to save the picture
• The picture will be saved in JPEG format.
• For details, refer to “Operating Instructions for advanced features (PDF format)”
or “Quick Guide for 4K Photo (supplied)”.
[4K PHOTO Bulk Saving]
If you use [4K PHOTO Bulk Saving] in the [Playback] menu, you can
bulk save 5 seconds’ worth of 4K recording.
1
Use to select the 4K burst files and press [MENU/SET]
• If the burst time is 5 seconds or less, all the frames can be saved as a
picture.
2
Select the first frame to be bulk saved as a picture
• The selection method is the same as the operation to choose the frame you
want to save as a picture from a 4K burst file. (above)
• The picture will be saved in JPEG format as a single burst picture group.
To Next Page
Loading...
