Recording
56
DVQX1324 (ENG)
A stop motion picture is created by splicing pictures together.
1 Set the drive mode dial to [ ].
2 Select the menu.
3 Press 3/4 to select an item and set.
4 Press the shutter button halfway to exit the menu.
5 Press the shutter button fully.
6 Move the subject to decide on the composition.
• Repeat recording in the same way.
7 Touch [ ] to end the recording.
• It can also be ended by selecting [Time Lapse/Animation]
from the [Rec] menu and then pressing [MENU/SET].
• When [Auto Shooting] is set to [ON], select [End] on the
confirmation screen.
(If [Pause] has been selected, press the shutter button fully
to resume the recording.)
To create motion pictures after taking pictures, follow the steps below.
1 Select the methods for creating a motion picture.
• The recording format is set to [MP4].
2 Press 3/4 to select [OK] and then press [MENU/SET].
Creating Stop Motion Pictures ([Stop Motion Animation])
> [Rec] > [Time Lapse/Animation] > [Mode] > [Stop Motion
Animation]
[Auto Shooting]
[ON] Takes pictures automatically at a set recording interval.
[OFF] This is for taking pictures manually, frame by frame.
[Shooting Interval]
(Only when [Auto Shooting] is set to [ON])
2/1: Select the item (second)
3/4: Setting
[MENU/SET]: Set
Creating motion pictures from recorded pictures
[Rec Quality] Sets the quality of a motion picture.
[Frame Rate]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will be.
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
DC-G9LMBodyEB-DVQX1324_eng.book 56 ページ ２０１７年１１月１３日 月曜日 午前１０時４１分
To Next Page
Loading...
