37
Recording
(ENG) DVQX1749
3 Drag the frames to select the frame you want to save
as a picture.
• To continuously rewind/forward frame-by-frame, touch and
hold [ ]/[ ].
4 Touch [ ] to save the picture.
• The picture will be saved in JPEG format.
When selecting and saving pictures from a 4K burst file, you can select pictures easily by
skipping between marked positions.
∫ Skips to the marked positions
Touching [ ] allows you to switch to the marker operation screen, where you can press
2/1 to skip to the marked positions.
Touch [ ] to return to the original operation.
• Up to 10 markers are displayed for each file.
• In the following cases, markers may not be set by the Auto Marking function depending on the
recording conditions and the status of subjects.
– The camera is moving because of panning or jitter
– The movement of a subject is slow/small
– The subject is small
– A face is not facing front
∫ Switches a marker to be displayed
Touch [ ].
Settings: [Auto]/[Face Priority]/[Motion Priority]/[Off]
¢2
¢2 Displays manually set markers only.
Marker
White marker:
This is manually set during recording or playback.
Green marker:
This is automatically set by the camera during recording. (Auto
Marking function
¢1
)
¢1 The camera automatically sets markers on scenes in which
a face or the movement of a subject is detected.
(Example: At the scene when a vehicle passes by, a balloon
bursts, or a person turns around)
Marker operation screen
Fn1
AUTO
MODE
DC-G95PP-DVQX1749_eng.book 37 ページ ２０１９年３月２９日 金曜日 午後１時３１分
To Next Page
Loading...
