Menu Guide
60
DVQX1749 (ENG)
Applicable modes:
Type of optical measurement to measure brightness can be changed.
Applicable modes:
Disables operational sounds and output of light at once.
Settings: [ON]/[OFF]
[Metering Mode]
> [Rec] / [Motion Picture] > [Metering Mode]
Brightness
measurement position
Conditions
[]
Multiple
Whole screen
Normal usage
(produces balanced pictures)
[]
Center weighted
Center and surrounding
area
Subject in center
[]
Spot
[i] (spot metering target)
Great difference between brightness of
subject and background
(e.g. person in spotlight on stage,
backlighting)
[Silent Mode]
> [Rec] > [Silent Mode]
• Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled.
The following settings are fixed.
– [Flash Mode]: [Œ] (forced flash off)
– [Shutter Type]: [ESHTR]
– [AF Assist Lamp]: [OFF]
– [Beep Volume]: [s] (OFF)
– [E-Shutter Vol]: [ ] (OFF)
¥ Even when [ON] is set, the following lamp light up/flash.
– WIRELESS connection lamp
– Self-timer indicator
¥ Sounds that are produced by the camera regardless of your operations, such as the lens
aperture sound, cannot be muted.
¥ Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
DC-G95PP-DVQX1749_eng.book 60 ページ ２０１９年３月２９日 金曜日 午後１時３１分
To Next Page
Loading...
