Recording Videos – [Rec Quality]
141
[Filtering]
When [Rec. File Format] is set to [MOV], you can specify items such as
frame rate, number of pixels (resolution), and compression format (YUV,
bit value, image compression), and just display recording qualities that
meet those conditions.
1 In the [Rec Quality] setting screen, press [DISP.].
2 Press 34 to select a setting item and then press or .
• Settings: [Frame Rate]/[Resolution]/[Codec]
3 Press 34 to select the filtering conditions and then press or .
4 Press [DISP.] to confirm the setting.
• You are returned to the [Rec Quality] setting screen.
Clearing the filtering conditions
Select [ANY] in Step 3.
• The filtering conditions are also cleared when you do the following:
– Change the [Rec. File Format]
– Change the [System Frequency]
– Select a recording quality from [Rec Quality (My List)]
• When you change recording quality using a filter, the current filtering conditions
are stored.
To Next Page
Loading...
