Drive / Shutter / Image Stabilizer – Recording with Time Lapse Shot
218
4
Close the menu.
≥Press the shutter button halfway.
5
Start recording.
≥Press the shutter button fully.
•
When [Start Time Set] is set, the camera will enter into sleep status until the
start time is reached.
• During recording standby, the camera enters into sleep status when no
operation is performed for a certain period of time.
• The recording will stop automatically.
6
Create a video. (ÎTime Lapse Shot/Stop Motion
Animation Videos: 227)
• After the recording has stopped, select [Yes] on the confirmation screen to
proceed to create a video.
Even if you select [No], you can still create a video with [Time Lapse Video] in
the [Playback] ([Process Image]) menu. (Î[Time Lapse Video]: 496)
To Next Page
Loading...
