Special Video Recording – [Focus Transition]
420
3
Set focus positions.
≥Check the focus using the same procedure as MF (ÎRecord
Using MF: 190), and then press [WB], [ISO], and [ ] to set focus
positions.
≥You can also touch [POS1] to [POS3] to set focus positions.
4
Register the focus positions.
≥Press or to register the focus positions.
5
Start recording.
≥Press the video rec. button.
•
The advanced setting screen is displayed when you press [DISP.] before
recording. (ÎSetting Items ([Focus Transition]): 422)
• If you have enabled [Focus Transition Rec], Focus Transition will start when
you start recording a video.
∞
10(m) 5 3 2 1.5 1 0.5 0.1
1 2
3
POS1
POS2
POS3
To Next Page
Loading...
