256
Wi-Fi/Bluetooth
Using WEB services
■
Quickly sending pictures in the camera to WEB services
Display the picture
Press , and then press to select [Ye s]
(When you play back group pictures one by one, press
and then select [Upload(Wi-Fi)] or [Upload All(Wi-Fi)].)
• The same operation can be performed by touching [ ].
(When selecting a group picture, touch [
], [ ], [ ], [ ],
and then [
], and then select [Upload(Wi-Fi)] or [Upload All(Wi-
Fi)].)
Select a WEB service you want to connect
Check the send settings, and select [Set]
• Step , are not necessary when you continue to send another image.
• To change the transmission setting for the picture, press the [DISP.] button. (→248)
• To terminate the connection, press [MENU/SET] or operate other controls to exit the playback
screen. You can also terminate the connection by pressing [Wi-Fi] button on the camera.
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step and onwards again.
• You can also change the send settings by pressing [Wi-Fi] button while using a Wi-Fi
connection.
●
If the camera has no records of connections to wireless access points that are available, select the
connection method and connect the camera to a wireless access point. (→261)
●
When you are not registered to “LUMIX CLUB”, get a login ID and set a password. (→258)
●
When pictures are displayed as a group, they are all sent. When a single picture in a group is
displayed, only the picture being displayed is sent.
To Next Page
Loading...
