27
(ENG) VQT3R47
Applicable modes:
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the
difference in brightness between the subject and the background.
∫ Operate with the rear dial
1 Press the rear dial and enable [È].
2 Rotate the rear dial to compensate the
exposure.
A Exposure compensation value
Press 3 [È] until [EXPOSURE]
appears.
Press 2/1 to compensate the
exposure and then press
[MENU/SET].
• The exposure compensation value appears
on the screen.
• Select [0 EV] to return to the original
exposure.
DMC-FZ48&FZ47GN-VQT3R47_eng.book 27 ページ ２０１１年７月１３日 水曜日 午前９時２０分
To Next Page
Loading...
