DVQW1926 (ENG)
7
DVQW1926 (ENG)
7
ENGLISH
Attaching a Lens Hood
When attaching the lens hood (flower shape) supplied with the
interchangeable lens (S-R28200)
1 Align mark A ( ) on the lens hood with the mark on the tip of the lens.
2 Rotate the lens hood in the direction of the arrow to align mark B ( ) on the lens
hood with the mark on the tip of the lens.
0
When removing the lens hood, rotate while pressing the lens hood button C.
Hold the lens hood with your fingers placed as shown in the picture.
0
Do not hold the lens hood in a way that twists or bends it.
0
When carrying, the lens hood can be attached in the reverse direction.
1 Align mark B ( ) on the lens hood with the mark on the tip of the lens.
2 Attach the lens hood by rotating it in the direction of the arrow until it clicks.
DC-S5D_E-DVQW1926.book 7 ページ ２０２４年８月２１日 水曜日 午前１１時２分
To Next Page
Loading...
