Wi-Fi/Bluetooth
62
DVQX1761 (ENG)
What you can do with the Wi-Fi
®
/Bluetooth
®
function
These operating instructions refer to both smartphones and tablets as smartphones from
this point on unless noted otherwise.
• For details, refer to the “Operating Instructions for advanced features” (PDF format).
∫ Before Use
• Set the clock. (P19)
• To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped
with the wireless LAN function is required.
∫ About the WIRELESS connection lamp
• In [Wireless Connection Lamp] in the [Setup] menu, you can set
the lamp so that it will not light/flash.
∫ About the [Wi-Fi] button
In these operating instructions, a Fn button to which [Wi-Fi] is assigned is referred to as
the [Wi-Fi] button.
(By default, [Wi-Fi] is assigned to [Fn4] when the camera is in Recording Mode, while it is
assigned to [Fn1] when the camera is in Playback Mode.)
• For information about the Fn button, refer to P27.
• Remote shooting (P70)
• Playing back/saving images stored on the camera, or uploading them on social media sites
(P71)
• Editing motion pictures recorded with Snap Movie
Connect to a smartphone that supports Bluetooth Low Energy to expand the scope
of applications
• Pairing (connection setup) (P65)
• Camera Power Operations (P69)
• Shutter Remote Control
• Sending recorded images to a smartphone automatically
• Recording location information of a smartphone on recorded images
• Synchronising the camera’s clock with a smartphone
Lit blue
When the Wi-Fi/Bluetooth function is ON or
connected
Blinking blue
When sending image data by operating the
camera
DC-G90-G91EB-DVQX1761_eng.book 62 ページ ２０１９年４月２日 火曜日 午後４時５９分
To Next Page
Loading...
