SR-DSV10739 - 9 -
! !! Motor Business Unit, Home Appliances Company, Panasonic
*4 Command pulse inhibit input(INH)can be assigned only to SI10 input.
Wrong assignment will cause Err33.7 Command pulse input inhibit input.
Input signals (command pulse train) and their functions
Suitable interface can be chosen from two kind of interface based on the specification of command pulses.
Pulse train interface with line driver
Name Symbol
Connector
Pin No.
Description Circuit
PULSH1
Command pulse
input 1
PULSH2
SIGNH1
Command
direction input 1
SIGNH2
- Input terminal for the position command pulse. It can be selected by
setting corresponding parameters.
- Disabled in such control modes as the speed control or the torque control,
which does not require position commands.
- The maximum allowable input frequency is 500kpps.
Di-
Output signals (Common) and their functions
Name Symbol
Connector
Pin No.
Description
Circuit
Multi-function output 1 SO1
Multi-function output 2 SO2
Multi-function output 3 SO3
- The function changes according to the parameter settings. See below. o-1
To Next Page
Loading...