➢ While holding the dust bin over a
trash container, press dust bin door
latch and the debris will fall out.
➢ Remove any clogs that might be
located in the pre-filter. (See
CLEANING PRE-FILTER, p. 38, 40)
➢ Shake the dust bin to release any
debris that might hang in the pre-
filter
TO REPLACE DUST BIN
➢ After the dust bin is empty of
debris, firmly close the door. Make
sure you hear a “click” sound to
indicate that the door is fully
latched.
- 36 -
CAUTION
Be sure to hold the dust bin over a
proper trash container prior to
releasing the door of the dust bin.
➢ Place dust bin back into vacuum
cleaner by inserting the bottom first
and tilting back.
➢ Push forward and lower dust bin
handle to lock dust bin in place.
To Next Page
Loading...
