Panasonic MC-UL425B - Page 28

NOTE: Hold the handle to support the
vacuum cleaner when using tools and
disconnecting or attaching the hose.
➢ Disconnect the hose & wand from
the vacuum cleaner.
➢ Pull the wand gently in the direction
of the arrow to disconnect.
➢ It may be necessary to slightly twist
the hose handle to loosen from the
nozzle hose.
➢ Crevice tool, dusting brush, floor
brush (some models), or air turbine
(some models) can attach to either
wand or hose.
➢ For additional reach, the dusting
brush may be attached to the end of
the crevice tool.
Wand
Tube
Tubo
Hose
Tuyau
Manguera
Nozzle Hose
Tuyau de tête
d’aspiration
Manguera de
la boquilla
CAUTION
• DO NOT overextend your reach with
hose as it could tip vacuum cleaner.
Dusting
Brush
Brosse à
epousseter
Cepillo para
sacudir
Air Turbine*
Turbine à aire
Turbina de aire
Wand
Tube
Tubo
Crevice Tool
Suceur plat
Herramienta
para sacudir
Hose
Tuyau
Manguera
Floor Brush*
Brosse à planchers
Cepillo para pisos
Using Tools
- 28 -
CAUTION
Selector should be placed in BARE
FLOOR (TOOLS) position when
using vacuum cleaner on bare floors
and when using tools. Incorrect
setting my cause floor or carpet
damage.
Do not leave the vacuum cleaner in
one location with the agitator
running. Floor or carpet damage
may occur.
* Some Models
Certains modèles
Algunos modelos