Panasonic MCO-170M Series - Page 52

51
3. Press Chart key to lead the Chart screen.
4. On the Chart screen, input the date (year / month
/ day) of the operation log you want to display
graphically.
5. On the Chart screen, by pressing Show key after
pressing the item you want to display graphically,
the graph of each operation log is displayed.
・Actual Temp.:
Chamber temperature log graph
(Go to procedure 6)
・Actual CO
2
Level:
CO
2
density log graph
(Go to procedure 7)
・Actual O
2
Level:
O
2
density log graph
(Go to procedure 8)
・Door Opening:
Open/close state of outer door log graph
(Go to procedure 9)