EasyManua.ls Logo

Panasonic MDF-U54V Series - Page 38

Panasonic MDF-U54V Series
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
SPECIFICATIONS
Product name
Ultra-Low Temperature Freezer
MDF-U54V
Ultra-Low Temperature Freezer
MDF-U54VC
External dimensions
W770 mm x D870 mm x H1990 mm
Internal dimensions
W630 mm x D600 mm x H1380 mm
Effective capacity
519 L
Exterior
Painted steel
Interior
Painted steel
Outer door
Painted steel
Inner door ABS resin panel with stainless frame, 2 doors
Shelf Stainless steel, 3 shelves (adjustable)
Inner dimension; W608 mm x D535 mm, Load; 50
kg
/shelf
Access port 17 mm diameter, 3 locations (back, bottom x 2)
Insulation
Vacuum insulation panel + Rigid polyurethane foamed-in place
Compressor High stage side; Hermetic type, Output; 1100 W
Low stage side; Hermetic type, Output; 1100 W
Evaporator Tube on sheet type
Condenser High stage side; Fin and tube type, Low stage side; Shell and tube type
Refrigerant
High stage side; R-407D, Low stage side; R-508
Temperature controller Microcomputer control system
Temperature display Digital display
Thermal sensor Platinum resistance (Pt 1000
Ω
)
Alarm High temp. alarm, Low temp. alarm, Power failure alarm
Door alarm, Filter alarm
Remote alarm contact Allowable contact capacity: DC 30 V, 2 A
Battery Nickel-metal-hydride battery, DC 6 V, 1100 mAh, Auto-recharge (5HR-AAC)
Accessories 1 set of key, 1 scraper
Weight 296
kg
301
kg
Voltage booster None Built-in
Optional component Inventory rack (IR-220U, IR-224U), Small inner door (MDF-5ID),
Drawer rack (MDF-50R),
Temperature recorder (MTR-G85C)*,
Interface board (MTR-480), Interface board (MTR-L03),
Data acquisition system (MTR-5000),
Back up cooling kit (CVK-UB2, CVK-UB2I): LCO
2,
(CVK-UBN2): LN
2
Note
:
• Design or specifications will be subject to change without notice.
• Refer to the updated catalog when ordering an optional component.
*: Power source of the temperature recorder shall be 220 V.
• When a data transmitting function to the personal computer is done, an interface board MTR-480
(option) and communication cable of 9 pin Dsub cross type for RS232C are necessary.

Related product manuals