Panasonic MEDL*83 Series - Page 68

No. SX-DSV03015 - 65 -
Motor Business Unit, Panasonic Corporation
Model MDDLN45SE MDDLN55SE MEDLN83SE MEDLN93SE
Power supply input
Single phase/
3 phase 200 V
Single phase/
3 phase 200 V
3 phase 200V 3 phase 200V
Maximum current rating 24 A 40 A 60 A 80 A
Rotary encoder feedback signal Resolution: 8388608 P/r Resolution: 8388608 P/r Resolution: 8388608 P/r Resolution: 8388608 P/r
Regenerative discharge resistor Built-in Built-in Built-in Built-in
Auto gain tuning function Provided Provided Provided Provided
Dynamic brake function Provided Provided Provided Provided
Absolute system Available
NOTE)
Available
NOTE)
Available
NOTE)
Available
NOTE)
Ambient temperature main power
supply cable
0 – 55 °C 0 – 55 °C 0 – 55 °C 0 – 55 °C
Control power cable HVSF 0.75 mm
2
HVSF 0.75 mm
2
HVSF 0.75 mm
2
HVSF 0.75 mm
2
AWG18 AWG18 AWG18 AWG18
Main power supply cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
AWG14 AWG14 AWG14 AWG14
Ground cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
AWG14 AWG14 AWG14 AWG14
Motor cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 3.5 mm
2
AWG14 AWG14 AWG14 AWG12
Inrush current
(Main power supply) (*1)
Max. 29 A Max. 29 A Max. 29 A Max. 29 A
Inrush current
(Control power dupply) (*1)
Max. 14 A Max. 14 A Max. 14 A Max. 14 A
Weight Approx 1.8 kg Approx 1.8 kg Approx 2.7 kg Approx 2.5 kg
Dimensions Size D Size D Size E Size E
(*1) Current values were calculated on the basis of the power supply input described above, assuming a voltage of 200 V.
(Note) The absolute encoder backup battery is externally connected.
<Caution>
The lithium-metal battery is used as a backup battery.
There are restrictions for transportation of the lithium-metal batteries by an international transport rule
of dangerous goods etc.
Please inquire in detail through the purchase shop.