7-15
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in Trouble
7
Supplement
6
Junction connector for
encoder cable
(Optional connector kit)
Pin number when a connector (small motor) is used
Pin number when a connector (large motor) is used
Connector X6
(Optional connector kit)
3
5
2
1
2
5
6
1
Connector, ZHR-2
(by J.S.T.)
Connector for absolute encoder connection
(To be provided by customer)
*1 Battery for absolute encoder (Option):
DV0P2990
Battery box for absolute encoder:
DV0P4430
2
1
2
7
4
1
(4)
(1)
(6)
(5)
(3)
(7)
(9)
E5V
E0V
BAT+
BAT–
BAT+
BAT–
PS
BAT–
BAT+
FG
PS
E5V
E0V
PS
PS
FG (Case)
Twisted
pair
Title
Connector
Connector pin
Clamping Jig
Part No.
ZMR-2
SMM-003T-P0.5
YRS-800
Manufacturer
J.S.T.
J.S.T.
J.S.T.
Battery
*1
• Wiring Diagram
2. Absolute system
Battery (for Backup) Installation
When you make your own cable for 17-bit absolute encoder
Caution
When you make your own cable for 17-bit absolute encoder, connect the optional battery
for absolute encoder, DV0P2990 as per the wiring diagram below. Connector of the bat-
tery for absolute encoder shall be provided by customer as well.
Install and x the battery securely. If the installation and xing of the battery is not appro-
priate, it may cause the wire breakdown or damage of the battery.
Refer to the instruction manual of the battery for handling the battery.
• Installation Place
1) Indoors, where the products are not subjected to rain or direct sun beam.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen
sulde, sulfurous acid, chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline
and salt and so on, and are free from splash of inammable gas, grinding oil, oil
mist, iron powder or chips and etc.
3) Well-ventilated and humid and dust-free place.
4) Vibration-free place
Note
Related page
• Only for position control type does not support the 17-bit absolute specication.
It supports only 20-bit incremental specication.
• P.7-118 “Battery For Absolute Encoder”
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com